biomass, pellets
 

Biomass boilers

 
 

The biomass concept is very extensive and includes/understands all type of organic matter, as much of vegetal origin as animal, and is formed thanks to the photosynthesis directly (like vegetables) or indirectly (by the digestion of vegetables).

The biomass is formed by forest firewood, shrubs, remainders, rest of pruning, agricultural remainders like the straw, remainders of lumber industries, agro-alimentary wastebaskets and, dung, urban remainders of agroganaderas operations, solid remainders and urban residual waters among others.

Most of these components, not to say the totality, can be used like fuel, or of direct form (burning them) or transforming them to other fuel forms like biogás or biocombustibles.

To use the combustible biomass is a renewable resource since it takes place at the same speed of the consumption, as long as the consumption is controlled and the sobreoperation of the natural resources is avoided.

Unlike fossil fuels, the biomass is respectful respectful with the environment, since it does not emit effect gases conservatory of uncontrolled form.

When biomass combustion, it releases CO2 to the atmosphere, the same CO2 that absorbed of her during its growth, if it is vegetal organic matter, or which they absorbed the plants that ingested, if animal is organic matter.

If it is consumed of sustainable way, the cycle is closed and the level of CO2 to the atmosphere stays constant, so that its use does not contribute to generate the climatic change.

And not only that, but that with its consumption replaces the fossil fuel consumption, thus avoiding to generate emissions that did not comprise of the atmosphere previously and that is causes of the climatic change.

In addition, to use combustible biomass is beneficial for the surroundings: it eliminates remainders helping to diminish the fire risk and the accumulation of remainders, and treats residual waters and purines that is source of contamination of the subsoil and underground waters.

Pellets

Pellets are remainders coming from forest cleaning and lumber industries that are crushed and turned to shavings. Once dried to diminish the humidity level and possible resins, they are pressed in form of small cylinders.

Pellets is an evolved application of the biomass, is clean, of easy handling, occupies little space and allows the capacity to autoalimentar itself to the stoves that use them, working independent form that during hours.

In addition they are very ecological, since they give utility to a remainder and they avoid the cutting of trees for the heating, as it is the case of the firewood.

 

Products  
Photovoltaic solar energy
Solar thermal energy
Low consumption boilers
Greywater treatment
Radiating ground
Heat pump
Air conditioning of
swimming pools
Wind energy
Biomass
Other sources of energy  
Subsidized investments  
renewable energies : to ensure the future of our children
Client attention:
902 053 038

Stove of pellets Ecotherm of Thermorossi

Thermorossi makes stoves of pellets that excel by their high quality, low level of emissions and high performance. When using combustible biomass it does not contribute to the effect conservatory and helps to conserve theenvironment.

These stoves integrate a recovery system of the temperature of smoke that guarantees a yield of until 86%, and thanks to the capacity to supply itself, can work a complete day of totally independent form, without having to be recharged.

They have a programmer who allows to the automatic dull ignition and for greater comfort and independence, and the brazier to specially designed to always assure a perfect combustion.

Model 3000

Model 3000 of pellets stoves Model 3000 of pellets stoves
Model 3000 of pellets stoves

Engineering datas of model 3000
Thermal power in minim./máx. 2.5 - 9 kW
Calefactable volume 216m3
Yield even 86%
Electrical consumption (min./max.) 65 - 130 W.
exit diameter of smoke 80
Diameter takes outer air 50
Capacity hopper pelltets 17 kg.
Consumption pellets (min./max.) 0,6 - 2,1 Kg/h
Autonomy to min./max. 28 - 8 h.
Forced ventilation 10 velocidades
Loudness to regime min. 36 db.
Levels of power 5
Weight: ceramic version/steel 132 / 113 kg.
Dimensions (LxA xH) 455 x 522 x 990

» request a budget of pellets stove

Model 6000

Model 6000 of pellets stoves Model 6000 of pellets stoves
Model 6000 of pellets stoves

Engineering datas of model 6000
Thermal power in minim./máx. 3.1 - 11 kW
Calefactable volume 324m3
Yield even 90%
Electrical consumption (min./max.) 65 - 130 W.
exit diameter of smoke 80
Diameter takes outer air 50
Capacity hopper pelltets 53 kg.
Consumption pellets (min./max.) 0,8 - 2,4 Kg/h
Autonomy to min./max. 60 - 23 h.
Forced ventilation 3 velocidades
Loudness to regime min. 38 db.
Levels of power 5
Weight: ceramic version/steel 233 / 207 kg.
Dimensions (LxA xH) 750 x 593 x 1030

Other characteristics: Operation to watertight camera. System of combustion backing with recovery of smoke. Thermostat of security. System to double combustion. Control at a distance. System of auto cleaning of crystal.

» request a budget of pellets stove

Model 8000

Model 8000 of pellets stoves
Model 8000 of pellets stoves

Engineering datas of model 8000
Thermal power in minim./máx. 3.1 - 11 kW
Calefactable volume 324m3
Yield even 90%
Electrical consumption (min./max.) 65 - 130 W.
exit diameter of smoke 80
Diameter takes outer air 50
Capacity hopper pelltets 23 kg.
Consumption pellets (min./max.) 0,8 - 2,4 Kg/h
Autonomy to min./max. 29 - 10 h.
Forced ventilation 3 velocidades
Loudness to regime min. 38 db.
Levels of power 5
Weight: ceramic version/steel 206 / 186 kg.
Dimensions (LxA xH) 750 x 593 x 1315

Other characteristics: Operation to watertight camera. System of combustion backing with recovery of smoke. Thermostat of security. System to double combustion. Control at a distance. System of auto cleaning of crystal.

» request a budget of pellets stove

Chimneys to pellets

It is possible to insert stoves of pellets with chimney form, comfortable, clean, ecological and elegant a solution.

Chimneys to pellets Chimneys to pellets Chimneys to pellets
Chimneys to pellets Chimneys to pellets Chimneys to pellets
Chimneys to pellets

Engineering datas of the chimneys to pellets
Thermal power in minim./máx. 3 - 10 kW
Calefactable volume 250m3
Yield even 86%
Electrical consumption (min./max.) 65 - 130 W.
exit diameter of smoke 80
Diameter takes outer air 50
Capacity hopper pelltets 22 kg.
Consumption pellets (min./max.) 0,7 - 2,2 Kg/h
Autonomy to min./max. 28 - 8 h.
Forced ventilation 10 velocidades
Loudness to regime min. 38 db.
Levels of power 5
Weight: ceramic version/steel 123 kg.
Dimensions (LxA xH) 725 x 590 x 590

Other characteristics: Operation to watertight camera. System of combustion backing with recovery of smoke. Thermostat of security. System to double combustion. Command control. Weekly programmer. System of crystal autocleaning . Facilities for thermostat connection - crono thermostat - ModemGSM.

» request a budget of pellets chimneys
www.soliclima.com 
Specialists in projects and facilities based on the power saving: radiating ground, sanitary hot water, heating, air conditioning and dehumidification of swimming pools, boilers of low temperature or condensation. for inner installation - Air conditioning of swimming pools - Inner air conditioning by radiating ground - Inner air conditioning by air Consists of determining the most suitable model. An operation for single which a company with the sufficient experience and the good technical knowledge will be able to make correctly. ·